Interior & exterior anti-graffiti coating for walls and facades
StopOtags anti-graffiti coating is the least expensive protective and preventive solution to prevent damage to facades and walls due to tags made with felt markers, paint, ink, etc. Very useful in places that are frequently tagged, this coating offers optimal protection by facilitating the subsequent cleaning of marks and dirt with StopOtags Cleaner. It is active on most of the materials used in our buildings: wood, brick, stone.
It has an extremely low environmental impact. As StopOtags is solvent- and chlorine-free and does not deteriorate the substrate. Very simple to use and can be applied through a roller. The maximum efficiency is visible in less than one hour.
Apply for indoors and outdoors through a roller to protect porous substrates (wood, brick, rendering, stone), general surfaces against dirt, paint-based graffiti (acrylic or oil-based), inks and varnishes.
Slightly gelled milk ready for use; Density: 1.00; Microporous and water repellent; Colourless; Available in 1- and 5-litre pots; Storage: 12 months in its unopened original packaging.
Mix the product gently before application. Apply through a roller or a brush. Apply two coats. Active, after 72 hours of the second coat application. Yields approximately 150 to 250 g/m2, depending on the nature of the substrates and the method of application. The temperature of the substrate must be between 5 °C and 30 °C for optimum performance.
Wear suitable protective clothing and gloves. Wear eye and face protection. Do not eat or drink while dealing with this. In the case of splashing, rinse with water.
Dump the residues in a waste treatment centre.
Solution based on vegetable wax and non-chlorinated bio-based resin. Water repellent and non-flammable. Contains no organic solvents, acid or soda. Max. VOC and SCOV <0.1 g/L.
With organic thinners.
AFNOR NF T36-005 – class 4a