Interior and exterior anti-graffiti varnish for walls and facades
StopOtags varnish is the least expensive protective and preventive solution to prevent the deterioration of facades and walls due to tags made with felt markers, paint, ink, etc. Very useful in places that are frequently tagged, this varnish offers optimal protection, making it easier to later apply StopOtags remover. It is active on most of the materials used in our buildings: concrete, wood, brick, metal, stone, PVC and glass.
It has an extremely low environmental impact. As StopOtags is solvent- and chlorine-free and does not deteriorate the substrate. Very simple to use and can be applied through a roller. The maximum efficiency is visible in less than 15 minutes.
Apply for indoors and outdoors through a roller to protect porous substrates (wood, brick, rendering, stone), general surfaces against dirt, paint-based graffiti (acrylic or oil-based), inks and varnishes.
Lightly gelled liquid varnish ready for use; Density: 1.00; Colourless; Available in 1- and 5-litre pots; Storage: 12 months in its unopened original packaging.
Mix the product gently before application. Apply through a roller or a brush. Apply two coats. Active, after 72 hours of the second coat application. Yields approximately 150 to 250 g/m2, depending on the nature of the substrates and the method of application. The temperature of the substrate must be between 5 °C and 30 °C for optimum performance.
Avoid application on substrates such as marble, rubber and plastics. Wear suitable protective clothing and gloves. Wear eye and face protection. Do not eat or drink while dealing with this. In the case of splashing, rinse with water.
Dump the residues in a waste treatment centre.
Resin-based solution in a non-chlorinated aqueous phase. Water repellent and non-flammable. Contains no organic solvents, acid or soda. Max. VOC and SCOV <0.1 g/L.
AFNOR NF T36-005 – class 4a
With organic thinners.